Skip to main content

shri Guru Gobind Singhji Institute of Engineering and Technology


shri Guru Gobind Singhji Institute of Engineering and Technology, at Nanded (SGGS, in short) is an autonomous institute set up and 100% funded by Government of Maharashtra. The institute is approved by the All India council for Technical Education (AICTE), Government of India. SGGS was selected under prestigious TEQIP program of World Bank. The SGGS Institute of Engineering and technology has the privilege of being one of the selected few to be offered total autonomy- academic, financial and administrative.

NOTIFICATION
Advertisement for Asst. Professor (PLM) Advertisement No. SGGSIET/EST/Recruit/2010-11/2356, Dated 24/11/10
===================================================================
Applications are invited from eligible candidates for appointment to the post of Assistant Professor for M. Tech. (Product Life Cycle Management) course of the Institute on a purely tenure basis for the period of eleven months.
QUALIFICATION:
The candidates applying for the posts should have the following educational qualifications and experience as specified in [ Pay Scales, Service Conditions and Qualifications for the Teachers and other Academic Staff in Technical Institutions (Degree) Regulations, 2010] AICTE Notification F.No. 37-3/Legal./2010 Dt. 05/03/2010.
Essential:
B. E. / B. Tech. and M. E. / M. Tech. in relevant branch with First Class or equivalent either in B.E. /B. Tech. or M. E. /M. Tech.
EXPERIEENCE:
Teaching / Research / Industrial experience in the relevant discipline for a minimum of 5 years after acquiring Bachelor’s Degree.
The clause of experience is not applicable for persons with Ph. D. in relevant discipline.
SALARY : Rs. 40,000/- per month (consolidated)
IMPORTANT INSTRUCTIONS
I. Each application submitted should be accompanied by a Demand Draft of Rs. 500/- for the candidates belonging to Open Category and Rs. 300/- for the candidates belonging to Reserved Category, drawn in favour of “Director, SGGSIE&T, Nanded” payable at Nanded.
II. The interviews are scheduled on 15th Dec. 2010 at 11.00 A.M. in the Board Room of the Institute.
III. The interview call letters will be posted to the eligible candidates. However, the list of shortlisted candidates will be displayed on website on 11th Dec., 2010.
IV. The academic qualification and experience acquired up to last date of submission of application will be taken into account in determining the eligibility of candidates for the posts and for short-listing them for the interview.
V. Application must be accompanied by passport size photograph of the candidate along with relevant documents indicating qualification, age, category, experience, etc. and demand draft; failing which the application will be treated as incomplete and will be liable to be summarily rejected.
VI. Last date for submission of application form is 09th December, 2010. Applications received after last date due to any reason including postal delay will not be entertained and responsibility in this regard will solely rest with the concerned candidate. Applications received on Internet / Fax will NOT be considered.
VII. Candidates must produce all original certificates at the time of interview. No extension of time will be granted.
VIII. The envelope containing the filled application form should bear a clear title as “Application for the post of Assistant Professor (PLM)”.
IX. No TA/DA will be paid to the candidate for interview.
X. Candidates must submit separate application for each post if he / she is applying for more than one post.
XI. Retired persons (with age limit of 65 years maximum) may also apply subjected to their satisfying the requirements of qualifications.
DIRECTOR
SGGSIE&T, Nanded.
APPLICATION FORMAT
To,
The Director,
SGGS Institute of Engineering & Technology,
Vishnupuri, NANDED (MS) - 431 606
Sir,
With reference to your advertisement No.____________________________________________ (mention advertisement number given for the post here), I am submitting my application for the post of Assistant Professor( CAD/CAM) / Assistant Professor (PLM ) / Registrar/ Librarian (select one only in one application form, strike out whichever is not applicable). My resume with bio-data is given below.
Name (Dr./Mr./Mrs./Kum.) (IN BLOCK LETTERS): _______________________ ______________________ ____________________________ (Surname) (First Name) (Father’s/Husband’s Name)
Postal Address: _____________________________________________________________________________
______________________________________________________________________________
______________________________________________________________________________
City: ______________ District: _____________ State: ______________ PIN: ____________
Permanent Address: ______________________________________________________________________________
_____________________________________________________________________________
_____________________________________________________________________________
City:_____________ District: ______________ State: _______________ PIN: ____________
E-mail Id: ____________________________________________________________________
Telephone with STD Code (Land-Line/Fixed Wireless): _______________________________
Cellphone number (mobile): ____________________________________________________
Page 1 of 3
Date of Birth (DD/MM/YYYY): _________________________________________________
Age as on 09/12/2010 : ______ years _____ month(s) _______ day(s)
Whether you belong to Reserved Category? YES / NO
(Strike out whichever is not applicable)
If yes above, tick mark the category to which you belong:
SC
ST
VJ
NT-1
NT-2
NT-3
SBC
OBC
(Attested photocopy of Caste, Caste Validity must be attached as a proof in respective cases)
Nationality: _________________________________
Domicile status of Candidate: Maharashtra State / Other State (mention) ________________
(Strike out whichever is not applicable)
Educational Qualifications:
(Attach attested copies of marks-sheet and certificates)
Examination
Name of the Institute/University/Board
Subject / Specialisation
Year of Passing
Percentage of Marks / Grade
S.S.C. (X)
H.S.C. (XII)
Diploma*
Graduation*
Post Graduation*
Ph.D.*
* Please specify name of the diploma / degree
Page 2 of 3
Experience (Teaching, Industrial and Research): Use separate sheet(s) if required
a) TEACHING EXPERIENCE: Total _____ years ______ month(s)
(Attach attested copies of certificates from the employer(s))
b) INDUSTRIAL / RESEARCH EXPERIENCE: Total _____ years ______ month(s)
(Attach attested copies of certificates from the employer(s))
Name of the Industry / Organization
Post Held
Period
Number of years
Particulars of Demand Draft:
Name of the Issuing Bank and Branch
Demand Draft No.
Date
Amount in Rs.
DECLARATION:
I hereby declare that, all statements made in this application are true, complete and correct to the best of my knowledge and belief. I understand that in the event of any information being found false or incorrect at any stage or not satisfying the eligibility criteria according to the requirements of the concerned advertisement, my candidature / appointment is liable to be cancelled / terminated.
Place:
Date: Signature of the Candidate
(Candidate may submit additional information, along with necessary photocopies, which he/she feels suitable for applying to the post, as additional pages along with this application form.)
Page 3 of 3
Name of the Institute
Post Held
Period
Number of years

Comments

Popular posts from this blog

RAJASTHAN PUBLIC SERVICE COMMISSION, AJMER SYLLABUS FOR SCREENING TEST FOR THE POST OF ASSISTANT AGRICULTURE OFFICER, AGRICULTURE DEPARTMENT

RAJASTHAN PUBLIC SERVICE COMMISSION, AJMER SYLLABUS FOR SCREENING TEST FOR THE POST OF ASSISTANT AGRICULTURE OFFICER, AGRICULTURE DEPARTMENT  A Pattern of Question Papers : 1 Objective Type Paper. 2 Maximum Marks : 360 3 Number of Questions : 120 4 Duration of Paper : Two Hours. 5 All Questions carry equal marks. 6 There will be Negative Marking. 7 50 questions each from Part - I & II. iz'u i= & f}rh; AGRICULTURE Agro-climatology-elements and effect on plant growth, weather abnormalities and protective measures, Elements of crop production, classification of crops, farming systems. Tillage, Soil erosion, soil and water conservation. Soil productivity fertility and management of problematic soils, Soils organic matter, organic manures, fertilizers and their use efficiency. Irrigation - role of water responses, quality of water and water pollution, water requirements of crops, methods of irrigation, drainage. Concept, scope and problems of dry land agriculture, Proble…

kurukshetra university syllabus engg 3rd ,4th sem

B.Tech 3rd Semester MATH-201 E MATHEMATICS - III L T P Theory : 100 Marks 3 1 - Sessional : 50 Marks Total : 150 Marks Duration of Exam : 3 Hrs. UNIT – I Fourier Series : Euler’s Formulae, Conditions for Fourier expansions, Fourier expansion of functions having points of discontinuity, change of interval, Odd & even functions, Half-range series. Fourier Transforms : Fourier integrals, Fourier transforms, Fourier cosine and sine transforms. Properties of Fourier transforms, Convolution theorem, Perseval’s identity, Relation between Fourier and Laplace transforms, Fourier transforms of the derivatives of a function, Application to boundary value problems. UNIT-II Functions of a Complex Variables : Functions of a complex variable, Exponential function, Trigonometric, Hyperbolic and Logarithmic functions, limit and continuity of a function, Differentiability and analyticity. Cauchy-Riemann equations, Necessary and sufficient conditions for a function to be analytic, Polar form of the …

syllabus of kUK ENGG ELECTRONICS 7TH ,8TH

B.TECH VIIth SEMESTER VLSI DESIGN (ECE-401E) L T P Theory : 100 3 2 - Sessional : 50 Time : 3Hrs UNIT 1 : NMOS & CMOS Fabrication Process Sequence, Basic electrical properties of NMOs & CMOS inverters, MOS Design Process : Stick Diagram & Design rules. UNIT 2 : Delay in MOS Circuits, Scaling of MOS Circuits, Some design examples, inverter, NAND gates, Multiplexer, Logic Function Block. Introduction to physical design of IC’s Layout rules & circuit abstractor, Cell generation, Layout environments, Layout methodologies, Packaging, Computational Complexity, Algorithmic Paradigms. UNIT 3: Placement : Partitioning, Floor planning, Placement. Routing : Fundamentals, Global Routing, Detailed Routing, Routing in FPGA’s. UNIT-4: Performance issues in Circuit Layout : Delay models, Timing Driven placement,TimingDrivenRouting,Via Minimization, Power Minimization, other issues. NOTE: The question paper shall have eight questions in all organized into four sections, each section ha…